The Dirty Hand Tools 22-Ton Gas Log Splitter will exceed your expectations in terms of splitting force and practical machine setup. The Log cradle effectively centers logs and prevents the logs from rolling off the splitter. The cradle also functions as a guide for the wedge, which makes your jobs a lot quicker and easier than manually guiding the logs through. The inbuilt measuring tape ensures you don’t overload the machine with logs that exceed the maximum length. This increases the life span of the splitter as overloading is a sure fire way to break your equipment down and not everyone’s gauge for log
measurement is one and the same!
The Dirty Hand Tools 22-Ton Gas Log Splitter comes complete with engine oil and hydraulic fluid and is quick to assemble to get you splitting in no time at all. Should you need to replace any parts for the splitter over the years, they are readily available and come at a reasonable cost.
The Dirty Hand splitter is great at cutting through knotted logs with irregular grain and makes splitting a breeze with its vertical/horizontal log splitting feature. The included trailer hitch and DOT-approved 16inch tires allows for easy transportation of the log splitter. This splitter will easily start in two or three pulls, or one pull if the engine is already warm-which is a great time saver and arm saver! Coupled with an auto return function, 10.9 second cycle time and adjustable detent, you’ll get splitting jobs completed quicker, freeing up more of your spare time.
You can use the three year warranty as a trial period for its excellent quality, regardless of how many logs you throw at it over that period. 22-tons is a lot of splitting force and you won’t need to think twice about throwing gnarly and knotted logs at it as it will hardly skip a beat. The Dirty Hand splitter is manufactured for regular splitters- don’t be surprised if your mates all want to borrow your splitter given its dependable reputation.
Check prices and read reviews on Amazon.com
Pros
The Dirty Hand Tools 22-Ton Gas Log Splitter‘s design is well thought out and has a reputation as one of the best quality splitters currently on the market. This machine is easy to maneuver from site to site with the included trailer hitch and sturdy 16-inch tires. The Dirty Hand splitter splits up to 25-inches in length, which means you can cut cords in much quicker time without the need to manually cut after splitting. It has a speedy cycle time of only 10.9 seconds which is also a great time saver and one of the shortest splitting times available on the market.
Cons
The only issue is the operating noise, not so much the engine noise but more the hitch chain and cotter pin which is actually louder than the engine noise. This isn’t great if you plan on splitting in your backyard in a built up residential area!
Dirty Hand Tools 22-Ton Gas Log Splitter Features:
- 22 ton gas log splitter
- Auto-return
- Splits up to 25in long
- 3 year warranty
- 10.9 second cycle time down and back
- 196cc Kohler engine/6.5 HP
- Horizontal/Vertical splitting capability
- Trailer hitch/ DOT approved tires (16in)
- 4in dia cylinder/ 24in stroke
Using The Log Splitter
Once your Dirty Hand Tools 22-Ton Gas Log Splitter has arrived follow the manufacturer’s guidelines for setup. Add the recommended amount of the hydraulic fluid and engine oil. Place the splitter in the intended position and location where you wish to split the logs then add blocks under the wheels for added stability. Make sure the area is level and free of obstacles. Ensure the suction port on the tank always sits on the lower side of the log splitter.
Move the fuel lever to the ON position and pull the starter grip. To split horizontally place a log securely onto the beam against the foot plate. For bigger logs you most likely want to split vertically for easier operation, without having to manually lift the log so high. For vertical operation simply release the pin on the front of the beam latch and tilt the beam upwards until the foot plate sits squarely and stable on the ground. Then place the log on the foot plate against the beam. Use the valve handle to drive the wedge directly into the log.
Regularly check engine oil and hydraulic fluid levels especially after heavy use of the splitter as operating with low fluid and oil levels will cause damage to the pump. It’s good to get into the habit of checking the levels before each operation. Also try to avoid allowing the wedge plate to come into contact with the foot piece as this will quickly wear your machine down.
The Bottom Line: Dirty Hand Tools 22-Ton Gas Log Splitter
The Dirty Hand Tools 22-Ton Gas Log Splitter is a highly recommended splitter in terms of quality and price. It will split almost anything you throw at it as long as you follow the maximum machine capabilities for length of logs.The best part about the Dirty Hand splitter is its ability to save time given its speedy return cycle, horizontal or vertical operating position and 22-ton splitting force.
It’s certainly worth investing the money for the life span on this splitter, especially if you like to heavily use your machine or even if you are a seasonal splitter. You’ll wonder why you ever spent all your precious time cutting logs by hand in the past! If you wanted to delve further into the reviews for the 22-ton Dirty Hand splitter, you will notice one common denominator- its owners are thoroughly impressed by its splitting capabilities and all seem to highly recommend the splitter.
Top highlights of the machine:
- Fast cycle time
- Ability to split gnarly and knotted logs
- High quality splitter and well thought out design
